Structural Engineering Service

Structural Analysis and Design

We perform comprehensive analyses and prepare detailed drawings aligned with project specifications and municipal requirements, ensuring safety, stability, and long-term durability for steel, concrete, and timber structures. We prepare and manage all documentation to demonstrate full compliance with applicable local, national, and international codes and standards to streamline regulatory approvals, and conduct specialized seismic and wind analyses to ensure reliable performance under earthquakes and high wind loads in relevant regions.

Codes and Standards
Designs are developed in compliance with applicable codes and standards, including but not limited to:

International Building Code (IBC)
ASCE 7 – Minimum Design Loads
AISC – Steel Construction Manual
ACI 318 – Concrete Design
AWC / NDS – Timber Design
Local amendments and municipal requirements
Project-specific international standards where required (ISO, API, DNV, etc.)

Foundation Design

A solid foundation is critical to the stability of any structure. We provide specialized foundation design services, complete with detailed reports. These reports are based on geotechnical investigations and provide recommendations for the most appropriate and cost-effective foundation system for specific site conditions.

We provide practical, code-compliant foundation engineering to safely transfer structural loads into the supporting soil or rock. Our designs are developed using project-specific geotechnical data and applicable building codes to control settlement, resist lateral and uplift forces, and ensure long-term structural performance under gravity, wind, and seismic loads.

Our approach balances engineering rigor, constructability, and permitting requirements, delivering foundation systems that are efficient to build and straightforward to approve.

Scope of Services:

Review and interpretation of geotechnical reports
Selection and design of shallow and deep foundation systems
Bearing capacity, settlement, and stability analysis
Wind and seismic load transfer to foundations
Coordination with superstructure, grading, and drainage plans

Key Deliverables
Foundation design criteria and assumptions
Sealed structural calculations
Foundation layout plans and elevations
Detailed footing, pile, and reinforcement drawings
Design notes, specifications, and permit support documentation

Industrial Structures

Design of pipe racks, platforms, process buildings, mechanical skids, and heavy equipment supports with long- term durability and ease of maintenance in mind.

We provide structural engineering services for industrial facilities and heavy-duty structures, supporting safe, reliable performance under demanding operational and environmental conditions. Our experience includes structures subjected to high loads, dynamic forces, fatigue, vibration, and aggressive service environments, where durability and constructability are critical.

Our approach integrates advanced structural analysis, code compliance, and practical design solutions to support efficient fabrication, installation, and long-term operation of industrial facilities.

Scope of Services

Structural analysis and design for industrial buildings and facilities
Design of platforms, pipe racks, equipment supports, and access structures
Evaluation of structures subjected to dynamic, fatigue, and impact loads
Wind and seismic analysis for industrial and process structures
Foundation and anchorage design for heavy equipment
Retrofit, modification, and expansion support for existing facilities

Key Deliverables

Industrial structural design criteria and assumptions
Sealed structural calculations and analysis models
Structural plans, framing layouts, and connection details
Foundation and anchorage drawings
Design notes, specifications, and permit support documentation

Connection Design & Detailing

Connections are engineered for both strength and constructability. We develop detailed welded and bolted connection designs - including baseplates, gussets, cleats, stiffeners, and bracing joints - ensuring ease of fabrication and on-site assembly. All connections are reviewed for fabrication tolerances, load paths, and inspection accessibility, with clearly dimensioned detail drawings ready for shop production.

We provide advanced structural connection design and detailing services for industrial, crane, offshore, and heavy-duty structures where connections are often fatigue-critical, dynamically loaded, and installation-sensitive. Our work ensures safe, reliable load transfer through bolted, welded, pinned, anchor, and fast-setup mechanical connections, aligned with recognized international design standards.

Our approach integrates connection-level force analysis, fatigue assessment, and constructability-driven detailing to ensure connections perform reliably under cyclic loading, impact, vibration, wind, wave, and operational effects. We evaluate both ultimate strength and serviceability behavior, ensuring compatibility with the global structural system and defined operating envelopes.

Standards & Code Alignment

Connection designs are developed in accordance with applicable standards, including:

AISC – Steel connections, bolts, block shear, prying action, slip-critical joints
ACI – Anchors, embed plates, concrete breakout, pull-out, and shear behavior
AWS – Weld sizing, detailing, inspection categories, and fatigue provisions
ISO – Mechanical fasteners, pinned joints, fatigue classifications
API (including API 2C / API RP 2A) – Offshore, crane, and fatigue-critical connection requirements
Design assumptions, load combinations, and acceptance criteria are aligned with the governing standard and project-specific requirements.

Technical Design Focus

Our connection design scope addresses:

Bolted connections
Welded connections
Pinned and hinged connections
Anchor and embed connections
Fast-setup and modular connections
Fatigue & dynamic behavior

Retrofit & Strengthening Studies

We conduct in-depth studies for the retrofitting and strengthening of existing Structure. Whether you need to increase load capacity, upgrade to meet new building codes, or restore structural integrity, our solutions are designed to enhance safety and extend the life of your structure.

We provide structural retrofit and strengthening engineering services to evaluate existing structures and develop targeted solutions that restore capacity, extend service life, and meet current code or operational requirements. Our studies are tailored for structures affected by increased loading, change of use, deterioration, damage, or updated regulatory criteria.

Our approach combines condition assessment, analytical evaluation, and constructability-focused design to deliver strengthening solutions that minimize disruption while improving safety, reliability, and long-term performance.

Scope of Services

Assessment of existing structural systems and load paths

Evaluation of as-built conditions, deterioration, and damage

Capacity checks for gravity, wind, seismic, and operational loads

Identification of deficiencies and performance gaps

Development of practical retrofit and strengthening schemes

Coordination with ongoing operations and construction constraints

Key Deliverables

Structural assessment and findings summary

Sealed analysis and capacity calculations

Retrofit and strengthening drawings and details

Design notes, specifications, and repair recommendations

Permit and construction support documentation

Modification & Extension Support

Our team provides expert engineering support for modifications and extensions to existing facilities. We ensure that any new additions are safely and eamlessly integrated with the original structure, maintaining its stability and performance.

We provide structural engineering support for building and structure modifications, expansions, and extensions, helping owners and project teams adapt existing facilities to new functional, operational, or regulatory requirements. Our services ensure that proposed changes are safely integrated into the existing structural system without compromising performance or compliance.

Our approach focuses on understanding the existing structure, evaluating load path impacts, and developing practical design solutions that accommodate new loads, layouts, and usage while minimizing disruption to ongoing operations.

Scope of Services

Review of existing drawings, records, and as-built conditions
Evaluation of existing structural capacity and load paths
Analysis of additional gravity, wind, seismic, and operational loads
Design of structural modifications and extensions
Integration of new framing, foundations, and connections
Coordination with architectural, MEP, and construction teams

Key Deliverables

Modification and extension design criteria
Sealed structural analysis and calculations
Structural drawings and connection details
Notes, specifications, and design clarifications
Permit and construction support documentation

Peer & PE Review

Independent review of structural designs prepared by other engineering firms to verify their accuracy, efficiency, and compliance.

We provide independent peer review and Professional Engineer (PE) review services to verify the technical accuracy, code compliance, and constructability of structural designs prepared by others. Our reviews help project teams reduce risk, identify potential issues early, and ensure designs meet applicable engineering standards and regulatory requirements.

Our approach focuses on objective, technically rigorous evaluation while maintaining collaborative coordination with designers, owners, and authorities having jurisdiction.

Scope of Services

Review of structural calculations, drawings, and specifications
Verification of design assumptions, load criteria, and code compliance
Independent check of analysis methods and results
Evaluation of constructability, detailing, and load paths
Review of wind and seismic design approaches
Identification of inconsistencies, omissions, and potential risks

Key Deliverables

Peer review findings summary and recommendations
Marked-up drawings and calculation comments
Formal PE review letters or certification statements (as required)
Responses to design team or AHJ review comments
Review close-out documentation

3D Modeling and Visualization

Creation of detailed 3D models and realistic renderings to help clients and stakeholders visualize the completed project.

We bridge the gap between calculation and construction. Our 3D modeling and visualization services provide a comprehensive digital twin of your structural project, ensuring design intent is clearly communicated to stakeholders, fabricators, and on-site teams. From conceptual massing to fabrication-ready detailing, we visualize every beam, connection, and bolt.

1. Intelligent 3D Structural Models
We deliver data-rich 3D models that go beyond simple geometry. Our models serve as a central database for your project, embedding critical metadata regarding material specifications, load capacities, and fabrication details directly into the structural elements.

2. Photorealistic Renderings & Walkthroughs
High-definition visualizations designed for client presentations and investor pitches. We create realistic lighting and texture studies that showcase how the structural skeleton integrates with architectural elements, helping non-technical stakeholders visualize the final built asset before ground is broken.

3. Clash Detection & Interference Reports
A proactive analysis that identifies conflicts between structural framing and MEP/HVAC systems. We provide detailed “clash reports” and resolved 3D models, ensuring zero-conflict installation on-site and eliminating costly rework during construction.

4. Construction Sequencing (4D Visualization)
We visualize the timeline of your build. By linking the 3D model to your project schedule, we create animated sequences that demonstrate the phased erection of steel and concrete, optimizing crane logistics and site safety planning.

5. Fabrication & Shop Drawings
Extracted directly from the approved 3D model, these 2D deliverables ensure absolute accuracy for manufacturers. We provide precise erection sheets, assembly drawings, and single-part drawings that are automatically synchronized with the master 3D model.

6. As-Built 3D Models
A final digital record of the structure as it was actually constructed. We update the model to reflect all site changes and field modifications, providing facility managers with an accurate baseline for future maintenance or expansion.